This code helps to control a servo motor using a touch sensor. You can connect the wires as below. Connect the touch sensor pin to D2 Connect the servo motor pin to D9 //below is the arduino code ...

Visualizing the environment with an ultrasonic sensor by gathering points that form a 3D point cloud using Arduino. This project aims to visualize real-time data from an ultrasonic sensor mounted on ...

A sound sensor is a simple, easy-to-use, and low-cost device that is used to detect sound waves traveling through the air. Not only this but it can also measure its intensity and most importantly it ...

V-LED This is the VCC pin of the LED. Connect this pin to the 5V pin of the Arduino with a 150Ω Current Limiting Resistor. LED-GND This is the Ground Pin of the LED. Connect this pin to the Ground pin ...

When [Robot Cantina] isn’t busy tweaking the 420cc Big Block engine in their Honda Insight, they’re probably working on some other completely far out automotive atrocity. In the video below the break, ...

Assemble your own Arduino-based FPV headtracker to control a camera that moves with your head, letting you look around and observe your surroundings while flying or driving RC vehicles for a more ...

This articles describes how you can use I2C (TWI) communication, Arduino and temperature sensors to measure 3 different temperatures. It can be very helpful when you want to measure the outside, ...

Rutronik Adapter Board RAB7 is an open-source hardware Arduino shield designed for AI-powered Sensor Fusion with seven environmental and inertial sensors from Bosch, Infineon, and Sensirion. The ...